|
General Introduction
The HD Doctor for seagate is a newly released
most advanced hardware-software combined solution for data
recovery needs towards Seagate HDD, with dozens of powerful
functions of practicability added specially for data
recovery. It is also the updated version of HDD Repairer
(Seagate) PRO. The most breakthrough is, unlike the original
Seagate program runs on DOS, with the HD Doctor console,
this new Seagate solution can be easily installed on any
desktop/laptop/server computer via USB (USB protocol 1.1 or
above) socket and runs on Microsoft Windows 98/2000/XP. With
full english program interface and supports, this program is
easy to use although there are many powerful functions, and
ought to be a tool must-have for data recovery and HDD
refurbishing companies. Besides the power functions online
software update, F > Repair for all series, read/write for
all modules, save your time and easy to operate with high
success rate.
Brief Introduction on Key Functions
Note: Newly added functions on this version are marked with
“*”.
1. Backup modules and tracks: necessary
functions for data recovery and drive repair
2. Firmware check, FW Repair, Read-Only
Repair: main functions for data recovery of Seagate HDDs
3. Clear G/P/T list, High-speed scan and
Sector Repair by adding bad sectors to P-list, Full Drive
Zerofill: works well for full drive bad sectors caused by
firmware problems and also for logical bad sectors
4. SELFSCAN: factory level sector repair for
mass defects, HDD unidentifiable, firmware error, drive slow
to be identified
5. Head Depop: head cut for head problems or
sequential bad sectors
6. HDD Parameters Setup: DIY the HDD
parameters, including the Model number, Serial number and
the LBA
7. Clear HDD Password: data recovery towards
password protect drives
8. Reset HDD SMART: reset HDD SMART,
initialize the drive, works good for data recovery
9. Motor Operations: manually control of the
drive motor, works well for PCB HOT SWAP in data recovery or
drive repair
10. * Windows version, USB support, fast and
easy to operate: you’re now able to run HD Doctor series
programs on one computer at the same time
11.
* More powerful support: more powerful
support towards Seagate series drives, as the following:
U5、U6、U7、U8、U9、U10、UX、K1、K2、K3、K4、K5
K7—APLINE、PUMA、PUMA2、APLUS
K8—TONKA
K9—TONKA2、TONKA15、TONKA40、TLITE1HD
K10—NHAWK1HD、GALAXY、GALAXY2D
Laptop—SATURN、NEPTUNE、MERCURY、MERC2、VENUS
12. * Open-design Resource Update: by
collecting needed source information from that HDD using HD
Doctor for Seagate and providing to us online, our tech tam
can upgrade the support list and send you back a new program
supports your model online, making things easier and faster
13. * Read/write for ALL Module
14. * ROM Read/write with PCB
15. * One Key Repair for “GC2” and “P” Error:
just one click to fix the “GC 2” problem of F>Repair and “P”
problem of SELFSCAN
16. * F>Repair for ALL Seagate HDDs
17. * Head Depop for 7200.8, 7200.9 and
7200.7 SATA
18. * Voltage/Current Protect System: with
this function, we could view the real-time voltage and
electric current displayed in graph. In this way, we could
see whether the power is stable. If the power were unstable,
the graph would be very different from normal. Then you
could check if there’re some problems about the power supply
or the connection. It also enables a drive-protect, in case
there’re short circuit being found, the program will cut off
the power automatically to avoid any damage to your drive
19. * View Sector: we could see the data of
any sector after we have manually set the two parameters
(Start Sector and Offset) on the right columns
20. * More Friendly CMD Mode: easier to
monitor and see, you can save the information of the drive
as txt file for analyzing
21. * Auto/Manual Baud-rate Set: this
function enables you to set the baud-rate of the
communication between the drive and the HD Doctor USB device
|
